Table of Contents
Advertisement
Starting up the device - Configuration
Parameter length
37 bytes
Input data
None
Output data
None
Identifier string n (n = 1 ... 5)
The identifier string defines both the identifier list for the segmentation and the passthrough filter for the
subsequent filtering.
The string may contain wildcards. Any number of '?' is permitted as placeholders for an arbitrary character
at exactly that defined position.
Also permitted are '*' as placeholders for a character sequence of arbitrary length, and an 'x' if the charac-
ter at the respective position is to be deleted. There are a total of five identifier strings.
An identifier with less than 5 characters must be null terminated. However, if the identifier string consists of
exactly 5 characters, it does not have to be terminated.
NOTICE
ASCII characters that cannot be displayed (<0x20h) must not be used in the identifier strings.
8.10.3 Module 54 – Segmentation according to identifier and separator
PROFINET-IO module identifier
Module ID: 1054
Submodule ID: 1
Description
This module activates the segmentation according to identifier and separator. The parameters specify the
identifiers to be searched for, the output mode, and the parameters for the identifier/separator algorithm.
Parameter
Tab. 8.31:
Parameters for module 54
Parameter
Identifier list
Identifier 1
Identifier 2
Identifier 3
Leuze electronic GmbH + Co. KG
Description
The identifier string is used for the
identifier list and the filtering ac-
cording to the segmentation.
See identifier 1
See identifier 1
Addr. Data type
0
STRING
5 characters
null termi-
nated
5
STRING
5 characters
null termi-
nated
10
STRING
5 characters
null termi-
nated
BCL 248i
Value range
Default
1 ... 5 bytes of
'*'
ASCII characters
1 ... 5 bytes of
\0
ASCII characters
1 ... 5 bytes of
\0
ASCII characters
81
Advertisement
Table of Contents
