Leuze electronic BCL 248i Operating Instructions Manual page 39

Starting up the device – Leuze webConfig tool
Overview of the configurable modules
• Overview
• The individual modules and their relationships to one another are graphically displayed in the mod-
ule overview. The display is context sensitive, i.e. click a module to directly access the correspond-
ing submenu.
• Decoder
• Configuration of the decoder table, such as code type, number of digits, etc.
• Data
• Configuration of code content, such as filtering, segmentation of bar code data, etc.
• Control
• Configuration of activation and deactivation, e.g. auto-activation, AutoReflAct, etc.
• Output
• Configuration of data output, header, trailer, reference code, etc.
• Communication
• Configuration of the host interface and the service interface
• Device
• Configuration of the switching inputs and outputs
NOTICE
A description containing notes and explanations for all called-up functions can be found at the
right-hand edge of the screen.
The language that is used can be selected in the webConfig tool via the language selection list.
The webConfig tool is available for all bar code readers of the BCL 200i series. Because configuration of
the BCL 248i PROFINET-IO device is performed via the PROFINET-IO controller, the module overview
shown in the webConfig tool is, in this case, used only for displaying and checking the configured parame-
ters.
The current configuration of your bar code reader is loaded upon startup of the webConfig tool. If you
change the configuration via the control while the webConfig tool is running, you can use the [Load param-
eter from device] button after making the changes to update the display in the webConfig tool. This button
appears in the upper left in the center window area in all submenus of the CONFIGURATION main menu.
Leuze electronic GmbH + Co. KG BCL 248i 39