Mac Address - Leuze electronic BCL 248i Operating Instructions Manual

Starting up the device - Configuration
Example: 255.255.255.0
Ä Confirm all of the settings dialogs with [OK] or [Close].
Ä Connect the Ethernet interface of the device directly to the LAN port of the PC.
Ä Start the webConfig tool using your PC's Internet browser with IP address 192.168.60.101.
NOTICE
If the IP address is incorrect, the device cannot be accessed.
Ä Make certain that the correct IP address is entered. The device can otherwise no longer be
accessed.
Setting the IP address with Device-Finder
Ä Download the program Device-Finder from the Internet to the PC.
Ä Call up the Leuze home page: www.leuze.com.
Ä Enter the type designation or part number of the device as the search term.
The program Device-Finder can be found on the product page for the device under the Downloads
tab.
Ä Connect the Ethernet interface of the device directly to the LAN port of the PC.
Ä Start the program Device-Finder.
ð The program displays all sensors of the BCL 200i series that are available in the network.
Ä Select your sensor from the list of sensors of the BCL 200i series.
Ä Change the IP address of the sensor to the desired IP address.
8.3.8

MAC address

The MAC address (Media Access Control address) of the device may be found on the name plate.
Address Link Label
The "Address Link Label" is an additional stick-on label that is affixed to the device.
DDLS 508i MAC BCL 248i
IP
Name
Fig. 8.4: Example: "Address Link Label"
• The "Address Link Label" contains the MAC address (Media Access Control address) of the device and
makes it possible to enter the IP address and the device name manually.
The area of the "Address Link Label" on which the MAC address is printed can be separated from the
remainder of the stick-on label if necessary using the perforation.
• The "Address Link Label" can be removed from the device and affixed in the installation and layout dia-
grams to designate the device.
• Once it is affixed in the documents, the "Address Link Label" establishes a unique reference between
the mounting location, the MAC address or the device, and the associated control program.
There is no need for time-consuming searching, reading, and manually writing down of the MAC ad-
dresses of every device that is installed in the system.
Leuze electronic GmbH + Co. KG
00:15:7B:20:00:15
BCL 248i 45