Table of Contents
Advertisement
Online commands
Command
Parameter
Acknowledgment 'PS=<aa>'
Leuze electronic GmbH + Co. KG
'PT'
'PT<BCC type><PS type>Status><Addr.>P. value addr.><P. value addr+1>...
[;<Addr.><P. value addr.>][<BCC>]'
<BCC type>
Check-digit function during transmission, unit [dimensionless]
'0'
No check digits
'3'
BCC mode 3
<PS type>
Memory from which the values are to be read, unit [dimensionless]
'0'
Parameter values stored in the flash memory
'3'
Operating values in RAM
<Status>
Mode of parameter processing, without function here, unit [dimension-
less]
'0'
No reset after parameter change, no further parameters
'1'
No reset after parameter change, additional parameters follow
'2'
With reset after parameter change, no further parameters
'6'
Set parameters to factory setting, no further parameters
'7'
Set parameters to factory settings, lock all code types; the
code-type setting must follow in the command.
<Ad-
Relative address of the data within the data set, four-digit, unit [dimen-
dress>'aaaa'
sionless]
<P. val-
Parameter value of the parameter stored at this address. The bb pa-
ue>'bb'
rameter set data is converted from HEX format to a 2-byte-ASCII for-
mat for transfer.
<BCC>
Check sum calculated as specified under BCC type
Parameter reply:
<aa>
Status acknowledgment, unit [dimensionless]
'01'
Syntax error
'02'
Impermissible command length
'03'
Impermissible value for checksum type
'04'
Invalid check sum received
'05'
Impermissible data length
'06'
Invalid data (parameter limits violated)
'07'
Impermissible start address
'08'
Invalid parameter set
'09'
Invalid parameter type
BCL 248i
123
Advertisement
Table of Contents
