Leuze electronic BCL 248i Operating Instructions Manual page 21

Device description
PWR LED
Tab. 4.1: PWR indicators
Color
---
Green
Orange
Red
Leuze electronic GmbH + Co. KG
State Description
OFF Device off
No supply voltage
Flashing Device ok
Continuous light Device ok
Briefly off - on Good Read
Green briefly off – No read
briefly red – green on
Continuous light Service mode
Flashing Device ok, warning set
Continuous light Device error/parameter enable
• Initialization phase
• Bar code reading not possible
• Supply voltage applied
• Self test running
• Bar code reading possible
• Self test successfully finished
• Device monitoring active
• Bar code reading successful
• Bar code reading not successful
• Bar code reading possible
• No data on the host interface
• Bar code reading possible
• Temporary operating fault
• Bar code reading not possible
BCL 248i 21