Leuze electronic BCL 608i Operating Instruction
  1. Manuals
  2. Brands
  3. Leuze electronic Manuals
  4. Barcode Reader
  5. BCL 608i
  6. Operating instruction

Leuze electronic BCL 608i Operating Instruction

Hide thumbs Also See for BCL 608i:
Table of Contents

Advertisement

Quick Links

Download this manual
BCL 608i
Bar Code Reader
O r i g i n a l o p e r a t i n g i n s t r u c t i o n s

Advertisement

Table of Contents
loading

Related Manuals for Leuze electronic BCL 608i

Summary of Contents for Leuze electronic BCL 608i

  • Page 1 BCL 608i Bar Code Reader O r i g i n a l o p e r a t i n g i n s t r u c t i o n s...
  • Page 2 © 2015 Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen / Germany Phone: +49 7021 573-0 Fax: +49 7021 573-199 http://www.leuze.com info@leuze.de Leuze electronic BCL 608i...

  • Page 3: Table Of Contents

    Cable lengths and shielding..........35 Leuze electronic BCL 608i...
  • Page 4 Operation ............. . 45 Commissioning – Leuze electronic webConfig tool ..... . 46 Connecting the service USB interface .
  • Page 5 18.2.2Module 0.5 ............. 91 Leuze electronic BCL 608i...

  • Page 6: About This Document

    Text passages with this symbol provide you with further information. Symbols for action steps  Text passages with this symbol instruct you to perform actions. Table 1.3: Terms and abbreviations Bar code reader Code reconstruction technology Leuze electronic BCL 608i...

  • Page 7: Safety

    The device must not be tampered with and must not be changed in any way. The device must not be opened. There are no user-serviceable parts inside. Repairs must only be performed by Leuze electronic GmbH + Co. KG. Competent persons Connection, mounting, commissioning and adjustment of the device must only be carried out by competent persons.

  • Page 8: Exemption Of Liability

    Safety Exemption of liability Leuze electronic GmbH + Co. KG is not liable in the following cases: • The device is not being used properly. • Reasonably foreseeable misuse is not taken into account. • Mounting and electrical connection are not properly performed.
  • Page 9 CLASS 2 LASER PRODUCT EN 60825-1:2007 AVOID EXPOSURE – LASER RADIATION IS EMITTED FROM THIS APERTURE Laser aperture Laser warning sign Laser information sign with laser parameters Figure 2.2: Laser aperture, laser warning and information signs - oscillating-mirror scanner Leuze electronic BCL 608i...
  • Page 10 2 mW Pulse duration: <150 µs <150 µs Wavelength: 405 nm 405 nm CLASS 2 LASER PRODUCT IEC 60825-1:2007 Complies with 21 CFR 1040.10 GB7247.1-2012 Figure 2.3: Laser warning and information signs – supplied stick-on labels Leuze electronic BCL 608i...

  • Page 11: Device Description

    • Numerous interface variants facilitate connection to the superior systems • RS 232, RS 422 as well as with integrated multiNet plus master • RS 485 and multiNet plus slave • alternatively, various fieldbus systems, such as PROFINET-IO Ethernet TCP/IP Ethernet /IP Profibus Ethernet Leuze electronic BCL 608i...
  • Page 12 • Four freely programmable switching inputs/outputs for the activation or signaling of states • Automatic monitoring of the read quality with autoControl • Automatic recognition and setting of the bar code type using autoConfig • Reference code comparison • Heavy-duty housing of degree of protection IP 65 Leuze electronic BCL 608i...

  • Page 13: Device Construction

    Device description Device construction Reading window Control panel with display, LEDs and buttons M12 connection technology USB interface Dovetail mounting M4 mounting thread Figure 3.2: Device construction Leuze electronic BCL 608i...

  • Page 14: Connection Technology

    PWR, M12 plug (A-coded) Figure 3.3: Location of the electrical connections Display elements 3.5.1 Structure of the control panel LED PWR LED NET Navigation buttons Escape button Enter button Display Figure 3.4: Structure of the control panel Leuze electronic BCL 608i...

  • Page 15: Status Display And Operation

    • No data on the host interface Flashes red Device ok, warning set • Bar code reading possible • Temporary operating fault Red, continuous Device error / parameter enable light • No bar code reading possible Leuze electronic BCL 608i...

  • Page 16: Operational Controls

    To mount, the cover of the service interface must be unscrewed. Then screw the tube body onto the USB connection on the device and plug the USB memory stick into the connection and close the connector hood with the cover to ensure degree of protection IP 65. Leuze electronic BCL 608i...

  • Page 17: Functions

    Two LEDs provide additional optical information on the current operating state of the device. The four freely configurable switching inputs/outputs SWIO 1 … SWIO 4 can be assigned various func- tions and control e.g. activation of the device or external devices, such as a PLC. Leuze electronic BCL 608i...

  • Page 18: Autoreflact

    You will find a matching reflector in Accessories, and more are available on request. Figure 4.2: Reflector arrangement for autoReflAct The autoReflAct function uses the scanning beam to simulate a photoelectric sensor and thus permits an activation without additional sensors. Leuze electronic BCL 608i...

  • Page 19: Autoconfig

    Device settings for operating the device on the Profibus are managed and configured exclusively by the Profibus controller (PLC). Permanent changes must be carried out here! For further information, see chapter 10 "Starting up the device - Configuration". Leuze electronic BCL 608i...

  • Page 20: Reading Techniques

    In this way, the device can also scan larger areas or spaces for bar codes. The reading field height (and the scan line length useful for evaluation) depends on the reading distance due to the optical opening angle of the oscillating mirror. Leuze electronic BCL 608i...

  • Page 21: Omnidirectional Reading

    In order to read arbitrarily oriented bar codes on an object, at least 2 bar code readers are necessary. If the bar code is not printed over-square, i.e. bar length > code length, bar code readers with integrated code reconstruction technology are necessary. Figure 5.3: Principle arrangement for omnidirectional reading Leuze electronic BCL 608i...
  • Page 22 For this purpose one multiScan master and one or more multiScan slaves are connected together via Ethernet/PROFINET. Figure 5.4: Scanner arrangement with the multiScan function The multiScan function for Ethernet/PROFINET is possible for a minimum of 2 and maximum of 32 devices! Leuze electronic BCL 608i...

  • Page 23: Mounting

    Total reflection occurs whenever the laser light of the bar code reader is directly incident on the surface of the bar code at an angle of 90°. The light directly reflected by the bar code may overload the bar code reader and thereby cause non-readings! Leuze electronic BCL 608i...

  • Page 24: Avoiding Total Reflection - Oscillating-Mirror Scanner

    This means that in order to be on the safe side and to avoid total reflection, the device with oscillating mirror must be inclined upward or downward 20° … 30°! Zero position Bar code Distance acc. to reading field curves ±25° Figure 6.2: Total reflection – oscillating-mirror scanner Leuze electronic BCL 608i...

  • Page 25: Possible Read Angles Between Device And Bar Code

    • The display of MS under the device address indicates that the USB memory stick is correctly con- nected and functional. Replacing a defective device  Uninstall the defective device.  Remove the external parameter memory from the defective device by unscrewing the protection hood. Leuze electronic BCL 608i...
  • Page 26 Cancel and activate with the enter button Make sure you select Cancel. Otherwise, the configuration in the external parameter memory is lost! The configuration is now imported from the external parameter memory and the device is immediately operational without any further configuration. Leuze electronic BCL 608i...

  • Page 27: Electrical Connection

    Bus Out, M12 socket (D-coded) Host/Bus In, M12 socket (D-coded) PWR, M12 plug (A-coded) Figure 7.1: Connections of the device Voltage supply and switching inputs/outputs The voltage supply (10 … 30 V DC) is connected at the PWR M12 plug. Leuze electronic BCL 608i...

  • Page 28: Pwr - Voltage Supply And Switching Inputs/Outputs 3 And 4

    The two switching inputs/outputs SWIO_1 and SWIO_2 are located on the SW IN/OUT M12 socket (see chapter 7.4). The other two (SWIO_3 and SWIO_4) of the four freely configurable switching inputs/outputs are located on the PWR M12 plug. Leuze electronic BCL 608i...
  • Page 29 60 mA at +10 … +30 V DC in normal operation! By default, the two switching inputs/outputs SWIO_3 and SWIO_4 are configured so that switch- ing input SWIO_3 activates the reading gate and switching output SWIO_4 switches on “No Read”. Leuze electronic BCL 608i...

  • Page 30: Service - Usb Interface (Type A)

    IP 65 is achieved only if the connectors and caps are screwed into place. Alternatively, a parameter memory in the form of a USB memory stick certified by Leuze electronic GmbH + Co. can be connected to the provided USB service interface. With this Leuze memory stick, degree of protection IP 65 is also ensured.
  • Page 31 2, and pin 2 of the bar code reader is, at the same time, configured as an output (and not as an input), the switching output malfunctions. NOTICE The maximum input current must not exceed 8 mA! Leuze electronic BCL 608i...

  • Page 32: Host / Bus In

    Transmit Data + Receive Data + Transmit Data - Receive Data - Thread Functional earth (housing)  For the host connection of the device, the “KB ET - … - SA-RJ45” ready-made cables are preferred (see table 16.3). Leuze electronic BCL 608i...

  • Page 33: Bus Out

    Ethernet interface. The use of this interface drastically reduces the cabling requirements, as only the first BCL 608i requires a direct connection to the switch, via which it can communicate with the host. All other BCL 608i are connected in series to the first BCL 608i (see figure 7.13).
  • Page 34 Electrical connection The BCL 608i is designed as an Ethernet device (acc. to IEEE 802.3) with a standard baud rate of 10/ 100 Mbit. A fixed MAC ID is assigned to each device by the manufacturer; this ID cannot be changed. The device automatically supports the transmission rates of 10 Mbit/s (10Base T) and 100 Mbit/s (10Base TX), as well as auto-negotiation and auto-crossover.

  • Page 35: Ethernet Wiring

    PROFINET-IO RT 100 m shielding absolutely required Network from the first PROFINET-IO RT The maximum segment shielding absolutely BCL to the last BCL length must not exceed required 100 m for 100Base-TX Twisted Pair (min. Cat. 5) Leuze electronic BCL 608i...
  • Page 36 Electrical connection Connection Interface Max. cable length Shielding BCL – power supply 30 m Not necessary unit Switching input 10 m Not necessary Switching output 10 m Not necessary Leuze electronic BCL 608i...

  • Page 37: Menu Description

    In this case, English is selected as the display language. Decoder table In the Decoder table submenu, 4 different code type definitions can be stored. Bar codes that have been read can only be decoded if they correspond to one of the definitions stored here. Leuze electronic BCL 608i...
  • Page 38 0 to 64 characters Digits 4 0 to 64 characters Digits 5 0 to 64 characters Reading reliability Value from 2 to 100 Check digit method As decoder 1 Standard Check digit transmis- As decoder 1 Standard sion Leuze electronic BCL 608i...
  • Page 39 Determines the function of switching input/output 1. In the case of passive, the connection is on 0 V if the Inverted parameter is set to OFF, and on +UB if the Inverted parameter is set to ON. Leuze electronic BCL 608i...
  • Page 40 Negative reference code comparison 2 The function set here specifies which event activates the switching output. Deactivation function 1 See Activation function 1 for selection options No function The function set here specifies the event that deactivates the switching output. Leuze electronic BCL 608i...
  • Page 41 OFF / ON Signal delay Value from 0 to 65535 Pulse duration Value from 0 to 65535 Activation function 4 see switching input/output 1 Invalid read result Deactivation function 4 see switching input/output 1 Reading gate start Leuze electronic BCL 608i...
  • Page 42 (host system) does not respond. Repetition time The repetition time can be set to any value between 5000 ms 100 and 60,000 ms. Time after which another attempt is made to establish a connection. Leuze electronic BCL 608i...

  • Page 43: Language Selection Menu

    Service menu Diagnostics This menu item is used exclusively for service purposes by Leuze electronic. Status messages This menu item is used exclusively for service purposes by Leuze electronic. Actions menu Start decoding Here, you can perform a single reading via the display.
  • Page 44 The following display appears: RC13xxzzzzzz RC13 Means that ReferenceCode number 1 is stored in RAM. This is always output Defined code type (see auto-setup) Defined code information (1 … 63 characters) Leuze electronic BCL 608i...

  • Page 45: Operation

     Press the enter button to enter the menu.  The PWR LED lights up red. You can now set individual parameters via the display.  Press the Escape button twice to return to the main menu. Leuze electronic BCL 608i...

  • Page 46: Commissioning - Leuze Electronic Webconfig Tool

    Upon successful installation of the USB driver, an icon automatically appears on the desktop. To check: In the Windows device manager, a device called “Leuze electronic, USB Remote NDIS Network Device” appears under the “Network adapter” device class following successful USB registration.

  • Page 47: Short Description Of The Webconfig Tool

    Commissioning – Leuze electronic webConfig tool Or alternatively: Open a browser on your PC and enter the following address: 192.168.61.100. This is the default Leuze service address for communication with bar code readers of the BCL 600i series. In both cases, the following start page appears on your PC.

  • Page 48: Module Overview In The Configuration Menu

    Commissioning – Leuze electronic webConfig tool Module overview in the Configuration menu The adjustable parameters of the device are clustered in modules in the Configuration menu. Figure 9.2: Module overview in the webConfig tool The webConfig tool is completely contained in the firmware of the device. Depending on firmware version, the module overview may vary from that shown above.

  • Page 49: Starting Up The Device - Configuration

    To use the webConfig tool, you need to establish a USB connec- tion between the device and a PC/laptop. Notes on use see chapter 9 "Commissioning – Leuze electronic webConfig tool". Via display The display offers basic configuration options for the device.

  • Page 50: 2Automatically Setting The Ip Address

    IP address in a ping command (e.g. ping 192.168.60.101 in a command line window under Windows). 10.3.3 Address Link Label Address Link Label is an additional stick-on label that is affixed to the device. Leuze electronic BCL 608i...

  • Page 51: 4Ethernet Host Communication

    The device requires from the user the IP address of the server (host system) and the port number on which the server (host system) accepts a connection. In this case, the device determines when and with whom a connection is established! Leuze electronic BCL 608i...

  • Page 52: 6Udp

     Press the enter button to enter the menu.  Select the Host communication menu item.  Press the enter button to enter the menu.  Select the UDP menu item.  Press the enter button to enter the menu. Leuze electronic BCL 608i...

  • Page 53: Further Settings

    Via a switching input, you can: • start decoding • stop decoding • start decoding and then stop decoding after a configurable time period • read a reference code • start the automatic code type configuration (AutoConfig) Leuze electronic BCL 608i...

  • Page 54: 3Control Of The Switching Outputs

    • Storage in a file and transfer using the webConfig tool • Using the external parameter memory 10.5.1 Via the webConfig tool With the webConfig tool, you can store entire configurations of the device on data carriers and transfer them from these to the device. Leuze electronic BCL 608i...

  • Page 55: 2With The External Parameter Memory

    The device stores a copy of the current configuration in the external parameter memory. This copy is immediately updated when the configuration is changed via the display or by a superior host system (PC/ PLC) via online commands. Leuze electronic BCL 608i...

  • Page 56: Online Commands

    Requests device version information Parameter Acknowledgment BCL 608i SM 102 V 1.3.8 2014-12-15 The first line contains the device type, followed by the device version number and version date. (The data which is actually displayed may vary from the val- ues given here.)
  • Page 57 Parameter Activates autoConfig Rejects the last code read Deactivates autoConfig and stores the decoded data in the cur- rent parameter set Leuze electronic BCL 608i...
  • Page 58 The duration of the pauses has been stepped in such a way that they can be distinguished by the eye. Parameter Starts the adjustment mode. Ends the adjustment mode. Leuze electronic BCL 608i...
  • Page 59 Reference code invalid Example Input = RS130678654331 (Code 1 (1), RAM only (3), UPC (06), code informa- tion) Reference code teach-in Command Description This command enables a reference code to be defined quickly by reading an example label. Leuze electronic BCL 608i...
  • Page 60 The command reads out the reference code defined in the device. If no parameters are specified, all defined codes are output. Parameter <reference code number> 1 … 2 value range of reference code 1 to 2 Leuze electronic BCL 608i...

  • Page 61: Online Commands For System Control

    The command deactivates decoding. This command can be used to deacti- vate the reading gate. Following deactivation, the read result is output. Because the reading gate was manually deactivated and, thus, no GoodRead criterion was met, a NoRead is output. Parameter Acknowledgment None Leuze electronic BCL 608i...

  • Page 62: Online Commands For The Parameter Set Operations

    Copying the default parameters to the permanent memory and to the main memory Acknowledgment PS=<aa> <aa> Status acknowledgment, unit [dimensionless] Syntax error Impermissible command length Reserved Reserved Reserved Impermissible combination, source type - target type Leuze electronic BCL 608i...
  • Page 63 Relative address of the data within the data set aaaa Four-digit, unit [dimensionless] <Data length> Length of the parameter data to be transferred bbbb Four-digit, unit [length in bytes] <BCC> Check sum calculated as specified under BCC type Leuze electronic BCL 608i...
  • Page 64 Impermissible value for checksum type Invalid check sum received Impermissible number of data requested Requested data does not (any longer) fit in the transmission buffer Impermissible address value Read access after end of data set Impermissible QPF data set type Leuze electronic BCL 608i...
  • Page 65 Output of the parameter differences between the default parame- ter set and the operating parameter set saved in volatile memory Output of the parameter differences between the permanent parameter set and the operating parameter set saved in volatile memory Leuze electronic BCL 608i...
  • Page 66 (factory parameter set) for initialization. This command can be used to edit the first two parameter sets (in permanent and volatile memory). A check sum can be used for reliable parameter transfer. Leuze electronic BCL 608i...
  • Page 67 <P.value> Parameter value of the -bb- parameter stored at this address. The parameter set data is converted from HEX format to a 2- byte-ASCII format for transfer. <BCC> Check sum calculated as specified under BCC type. Leuze electronic BCL 608i...
  • Page 68 <aa> Status acknowledgment, unit [dimensionless] Syntax error Impermissible command length Impermissible value for checksum type Invalid check sum received Impermissible data length Invalid data (parameter limits violated) Invalid start address Invalid parameter set Invalid parameter type Leuze electronic BCL 608i...

  • Page 69: Care, Maintenance And Disposal

    NOTICE Do not use aggressive cleaning agents such as thinner or acetone to clean the device. 12.2 Servicing 12.3 Disposing  For disposal observe the applicable national regulations regarding electronic components. Leuze electronic BCL 608i...

  • Page 70: Diagnostics And Troubleshooting

    (FE) • Avoid EMC coupling caused by power cables laid parallel to device lines • Overall network expansion exceeded • Check max. network expansion as a func- tion of the max. cable lengths Leuze electronic BCL 608i...

  • Page 71: Service And Support

    Monday to Friday 8.00 a.m. to 5.00 p.m. (UTC+1) E-mail: service.identify@leuze.de Return address for repairs: Service center Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen / Germany 14.1 What to do should servicing be required? Please use this chapter as a master copy should servicing be required! Enter the contact information and fax the form together with your service order to the fax number given below.

  • Page 72: Technical Data

    Table 15.3: Interface Interface type Interface type: 2x Ethernet on 2x M12 (D) Protocols Protocols: Ethernet TCP/IP (client / server) / UDP baud rate 10/100 MBaud Table 15.4: Electrical equipment Service interface USB 1.1 compatible, A-coded Leuze electronic BCL 608i...

  • Page 73: 2Oscillating-Mirror Scanner

    This is a Class A product. In a domestic environment this product may cause radio interference, in which case the oper- ator may be required to take adequate measures. 15.1.2 Oscillating-mirror scanner Specifications are the same as for line scanner with the following differences: Leuze electronic BCL 608i...
  • Page 74 15.4 "Reading field curves / optical data" Table 15.9: Electrical equipment Power consumption Max. 14 W Table 15.10: Mechanics Weight 1.5 kg Dimensions (H x W x D) 84 x 173 x 147 mm Leuze electronic BCL 608i...

  • Page 75: Dimensioned Drawings

    Technical data 15.2 Dimensioned drawings Optical axis M4, 7 mm deep M4, 6 mm deep Figure 15.1: Dimensioned drawing - line scanner Leuze electronic BCL 608i...
  • Page 76 Technical data Optical axis Optical swivel range Opening angle M4, 7 mm deep M4, 6 mm deep Figure 15.2: Dimensioned drawing - oscillating-mirror scanner Leuze electronic BCL 608i...

  • Page 77: Dimensioned Drawings: Accessories

    Rods, Æ 16 … 20 mm Figure 15.3: BT 56 mounting device Holder, turnable 360° ITEM joint, adjustable ± 90° M8x16 screwable cylinder, M8 serrated washer, M8 sliding block, connectors for ITEM profile (2x) Figure 15.4: BT 59 mounting device Leuze electronic BCL 608i...

  • Page 78: Reading Field Curves / Optical Data

    The zero position of the reading distance always refers to the front edge of the housing of the beam exit and is shown for the two housing types of the device (see figure 15.6). Leuze electronic BCL 608i...
  • Page 79 Distance acc. to reading field curves Figure 15.6: Zero position of the reading distance Reading conditions for the reading field curves Table 15.11: Reading conditions Bar code type 2/5 Interleaved Ratio 1:2.5 ANSI specification class A Reading rate > 75% Leuze electronic BCL 608i...

  • Page 80: 1Medium Density (M) - Optics

    Module = 0.3 mm: 400 mm - 800 mm (400 mm depth of field) Module = 0.35 mm: 400 mm - 900 mm (500 mm depth of field) Figure 15.8: Lateral reading field curve - Medium Density for oscillating-mirror scanner Leuze electronic BCL 608i...

  • Page 81: 2Low Density (F) - Optics

    Module = 0.35 mm: 500 mm - 1200 mm (700 mm depth of field) Module = 0.5 mm: 450 mm - 1450 mm (1000 mm depth of field) Figure 15.9: Reading field curve - Low Density for line scanner Leuze electronic BCL 608i...
  • Page 82 Module = 0.35 mm: 500 mm - 1200 mm (700 mm depth of field) Module = 0.5 mm: 450 mm - 1450 mm (1000 mm depth of field) Figure 15.10:Lateral reading field curve - Low Density for oscillating-mirror scanner Leuze electronic BCL 608i...

  • Page 83: Ordering Information And Accessories

    M: Medium Density (medium distance) F: Low Density (large distance) Beam exit: 0 = perpendicular 1 = front A list with all available device types can be found on the Leuze electronic website at www.leuze.com. 16.2 Type overview Table 16.2: BCL 608i part numbers Part no.
  • Page 84 50040155 KS 095-4A M12 plug for SW IN/OUT USB cables 50107726 KB USB-Service USB service cable External parameter memory 50108833 USB Memory Set External USB parameter memory Mounting devices 50027375 BT 56 Mounting device for rod Leuze electronic BCL 608i...

  • Page 85: Ec Declaration Of Conformity

    The bar code readers of the BCL 600 series have been developed and manufactured in accordance with the applicable European standards and directives. The manufacturer of the product, Leuze electronic GmbH + Co. KG in D-73277 Owen, possesses a certi- fied quality assurance system in accordance with ISO 9001.

  • Page 86: Appendix

    Negative acknowledge SYNCHRONOUS IDLE Synchronization EOF TRANSM. BLOCK End of data transmission block CANCEL Invalid END OF MEDIUM End of medium SUBSTITUTE Substitution ESCAPE Escape FILE SEPARATOR File separator GROUP SEPARATOR Group separator RECORD SEPARATOR Record separator Leuze electronic BCL 608i...
  • Page 87 SLANT Slant Number Number Number Number Number Number Number Number Number Number COLON Colon SEMICOLON Semicolon < LESS THAN Less than EQUALS Equals > GREATER THAN Greater than QUESTION MARK Question mark COMMERCIAL AT Commercial AT Leuze electronic BCL 608i...
  • Page 88 Capital letter Capital letter Capital letter Capital letter Capital letter OPENING BRACKET Opening bracket REVERSE SLANT Reverse slant CLOSING BRACKET Closing bracket CIRCUMFLEX Circumflex UNDERSCORE Underscore ‘ GRAVE ACCENT Grave accent Lower case letter Lower case letter Leuze electronic BCL 608i...
  • Page 89 Lower case letter Lower case letter Lower case letter Lower case letter Lower case letter Lower case letter Lower case letter OPENING BRACE Opening brace VERTICAL LINE Vertical line CLOSING BRACE Closing brace TILDE Tilde DELETE (RUBOUT) Delete Leuze electronic BCL 608i...

  • Page 90: Bar Code Samples

    Figure 18.1: Code type 01: Interleaved 2 of 5 Figure 18.2: Code type 02: Code 39 Figure 18.3: Code type 06: UPC-A Figure 18.4: Code type 07: EAN 8 Figure 18.5: Code type 08: EAN 128 Figure 18.6: Code type 10: EAN 13 Add-on Leuze electronic BCL 608i...

  • Page 91: 2Module 0.5

    Figure 18.7: Code type 11: Codabar Figure 18.8: Code 128 18.2.2 Module 0.5 Figure 18.9: Code type 01: Interleaved 2 of 5 Figure 18.10:Code type 02: Code 39 Figure 18.11:Code type 06: UPC-A Figure 18.12:Code type 07: EAN 8 Leuze electronic BCL 608i...
  • Page 92 Appendix Figure 18.13:Code type 08: EAN 128 Figure 18.14:Code type 10: EAN 13 Add-on Figure 18.15:Code type 11: Codabar Figure 18.16:Code 128 Leuze electronic BCL 608i...

Table of Contents