Starting Up The Device - Leuze Webconfig Tool; System Requirements; Start Webconfig Tool - Leuze electronic BCL 248i Operating Instructions Manual

Starting up the device – Leuze webConfig tool
7 Starting up the device – Leuze webConfig tool
With the webConfig tool, an operating-system independent, web-technology based, graphical user interface
is available for configuring bar code readers of the BCL 200i series.
7.1

System requirements

NOTICE
Ä Regularly update the operating system and the Internet browser.
Ä Install the current Windows Service Packs.
Tab. 7.1: System requirements for the webConfig tool
Monitor
Internet browser
NOTICE
Other Internet browsers are possible but have not been tested with the current device firmware.
7.2

Start webConfig tool

Ä Start the webConfig tool via your PC's Internet browser with IP address 192.168.60.101 or with the IP
address set by you.
ð 192.168.60.101 is the standard Leuze IP address for communication with bar code readers of the
BCL 200i series.
The following start page appears on your PC:
Fig. 7.1: webConfig tool – start page
The user interface of the webConfig tool is largely self-explanatory.
Leuze electronic GmbH + Co. KG
Min. resolution: 1280 x 800 pixels or higher
Recommended is a current version of:
Mozilla Firefox
Google Chrome
Microsoft Edge
BCL 248i 37