Starting Up The Device - Configuration; Profinet-Io; Starting The Device - Leuze electronic BCL 248i Operating Instructions Manual

Starting up the device - Configuration

8 Starting up the device - Configuration
LASER
Ä Observe the safety notices in see chapter 2.5 "Laser safety notices".
8.1

PROFINET-IO

The PROFINET-IO communication profile defines how participants serially transmit their data via the trans-
mission medium.
The PROFINET‑IO communication profile is designed for efficient data exchange on the field level. Data
exchange with the devices occurs primarily cyclically. For configuration, operation, observation and alarm
handling, acyclic communication services are, however, used as well.
Depending on the communication requirements, PROFINET-IO offers suitable protocols and transfer meth-
ods:
Real Time communication (RT) via prioritized Ethernet frames for
• Cyclical process data (I/O data stored in the I/O area of the control)
• Alarms
• Clock synchronization
• Neighborhood information
• Address assignment/address resolution via DCP
TCP/UDP/IP communication via standard Ethernet TCP/UDP/IP frames for
• Establishing communication
• Acyclic data exchange, and also for the transfer of various information types such as:
• Parameters for the module configuration while communication is being established
• I&M data (Identification & Maintenance functions)
• Reading diagnostic information
• Reading I/O data
• Writing device data
8.2

Starting the device

NOTICE
Before commissioning, familiarize yourself with the operation and configuration of the BCL 248i.
Before connecting the supply voltage, recheck all connections and ensure that they have been
properly made.
Ä Connect the +18 ... 30 V DC supply voltage (typically +24 V DC).
ð The BCL 248i starts up, the PWR, NET and LINK LEDs indicate the operating state.
First, you need to assign its individual device name to the BCL 248i.
Leuze electronic GmbH + Co. KG
ATTENTION
BCL 248i 40