Table of Contents
Advertisement
Fast commissioning
3.7
Bar code reading
Ä Test the device with the following bar code in format 2/5 Interleaved. The bar code module here is 0.5.
The PWR LED goes off briefly and then turns green again. Simultaneously, the read information is for-
warded to the superior system (PLC/PC) via the PROFINET-IO.
Ä Check the incoming data of the bar code information.
Alternatively, you can use a switching input for read activation (switching signal of a photoelectric sensor or
24 V DC switching signal).
Leuze electronic GmbH + Co. KG
Modul 0,5
6677889900
BCL 248i
17
Advertisement
Table of Contents
