Service Mode Functions; Service Mode Entry Procedure - Xerox Phaser 6115MFP Service Manual

Service Mode Functions

Service Mode Entry Procedure

Phaser 6115MFP Multifunction Product Service Manual
Caution
Ensure appropriate security for the Service Mode entry procedure. It
should NEVER be given to any unauthorized person.
Procedure:
1. On the initial screen, press the Menu/Select key to call [MACHINE
SETUP] to the screen.
2. Press the following keys in this order.
Stop→0→0→Stop→0→1
The window will display the following:
SERVICE MODE
1. System default
3. Press the down key to locate all command lines in the function tree
(page 6-4).
4. Once you find the desired function, press the Menu/Select again to enter
the subcommands.
5. Press the down arrow from the subcommand level to locate the desired
subfunction. Pressing the Menu/Select key at this level will execute the
selected command.
Note
Pressing the Cancel key at any level will bring you up to the previous
command level.
Exiting:
1. Press the Stop key to exit.
Adjustments and Print Function Settings
6-3