STMicroelectronics STM32WLEx Reference Manual page 1298

Revision history
Date Revision
24-Jun-2021 4
1298/1306
Table 265. Document revision history (continued)
Updated:
– Patented technology and errata sheet in the Introduction
– Section 3.3.2: Empty check
– OPTVAL in Section 3.4.2: Option bytes programming
– OPTNV description in Section 3.10.5: FLASH status register (FLASH_SR)
– Section 4.1: Sub-GHz radio introduction
– Section 4.2: Sub-GHz radio main features
– Section 4.5.5: Generic framing
– Section 4.1: Sub-GHz radio introduction
– New functionality in Section 4.6: Sub-GHz radio data buffer
– Section 4.13.172: Sub-GHz radio receiver gain control register (SUBGHZ_RXGAINCR)
– Section 4.7.2: Sleep mode
– Note removed in Set_RfFrequency() command
– Section 4.10: Sub-GHz radio application configuration
– Danger note removed in Section 4.13: Sub-GHz radio registers
– Figure 101: Brownout reset waveform
– PVD naming in Section 17.6.2: PWR control register 2 (PWR_CR2) and
Section 17.6.6: Power status register 2 (PWR_SR2)
– First sentence in Section 40.1.2: System reset
– External source (HSE32 TXCO)
– First sentence of Section 30.4: HSEM registers
– Caution in Section 12.4.4: DMAMUX request line multiplexer
– Note in Section 12.4.5: DMAMUX request generator
– New note in Polynomial programmability
– Figure 30: ADC block diagram
– Formula in Figure 17.5: RNG processing time
– Table 119: Interrupt control bits
– Table 82: CTR mode initialization vector definition
– Table 85: Initialization of SAES_IVRx registers in CCM mode
– Section 19.3.4: PKA public key acceleration
– Table 97: Montgomery multiplication
– Section 19.5: Example of configurations and processing times
– Table 122: PKA interrupt requests
– AFIO renamed in Section 21: General-purpose timer (TIM2)
– New note in Section 50.4.7: Trigger multiplexer
– Some bit descriptions in Section 26.7.2: LPTIM interrupt clear register (LPTIM_ICR)
– Table 430: Error calculation for programmed baud rates at
lpuart_ker_ck_pres = 32.768 kHz
RM0461 Rev 5
Changes
RM0461