Plug Removal; Figure 16: Pulling The Pull Tab; Figure 17: Removing The Plug Without Tools; Figure 18: Removing The Plug Using A Screwdriver - WAGO -I/O-SYSTEM 750 Manual
2ai pt 100/rtd 2-channel analog input for rtds
Hide thumbs
Also See for WAGO-I/O-SYSTEM 750:
- Manual (450 pages) ,
- User's installation and configuration (335 pages) ,
- Technical description, installation and configuration (236 pages)
Table of Contents
Advertisement
38
Mounting
5.3.2
Plug Removal
1.
Remove the plug from the I/O module by pulling the orange pull tab on the
plug toward the top of the I/O module.
Figure 16: Pulling the Pull Tab
The plug detaches from the I/O module.
Figure 17: Removing the Plug Without Tools
2.
Alternatively, you can also use a standard screwdriver at the position
shown (in the figure below) to remove the plug.
Figure 18: Removing the Plug Using a Screwdriver
Manual
Version 1.3.1
WAGO-I/O-SYSTEM 750
753-461 2AI Pt 100/RTD
Advertisement
Table of Contents
