Plug Removal; Figure 20: Pulling The Pull Tab; Figure 21: Removing The Plug Without Tools; Figure 22: Removing The Plug Using A Screwdriver - WAGO 750 Manual
4fdi 24v profisafe
Hide thumbs
Also See for 750:
- Manual (450 pages) ,
- User's installation and configuration (335 pages) ,
- Technical description, installation and configuration (236 pages)
Table of Contents
Advertisement
48
Mounting
5.3.2
Plug Removal
1.
Remove the plug from the I/O module by pulling the orange pull tab on the
plug toward the top of the I/O module.
Figure 20: Pulling the Pull Tab
The plug detaches from the I/O module.
Figure 21: Removing the Plug Without Tools
2.
Alternatively, you can also use a standard screwdriver at the position
shown (in the figure below) to remove the plug.
Figure 22: Removing the Plug Using a Screwdriver
Manual
Version 1.0.0, valid from HW/SW Version 01/01
WAGO I/O System 750
753-661/000-004 4FDI 24V PROFIsafe
Advertisement
Chapters
Table of Contents
