Plug Removal; Figure 17: Pulling The Pull Tab; Figure 18: Removing The Plug Without Tools; Figure 19: Removing The Plug Using A Screwdriver - WAGO I/O System 750 Manual
2do 24v dc 0.5a/ diagnostics 2-channel digital output; 24 v dc; short-circuit protected; high-side switching; with diagnostics
Hide thumbs
Also See for I/O System 750:
- Manual (468 pages) ,
- Quickstart reference (54 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
WAGO I/O System 750
753-506 2DO 24V DC 0.5A/ diagnostics
5.3.2
Plug Removal
1.
Remove the plug from the I/O module by pulling the orange pull tab on the
plug toward the top of the I/O module.
Figure 17: Pulling the Pull Tab
The plug detaches from the I/O module.
Figure 18: Removing the Plug Without Tools
2.
Alternatively, you can also use a standard screwdriver at the position
shown (in the figure below) to remove the plug.
Figure 19: Removing the Plug Using a Screwdriver
Public
Mounting
35
Manual
Version 1.3.1
Advertisement
Table of Contents
