Wago I/O Field App - WAGO 765-1503/100-000 Product Manual

Functions
Menu
Ports X01, X02 etc.
Settings
DIO Forcing
User Administration
Sign in,
Sign out
The functional scope described can vary depending on the module type.

5.5.3 WAGO I/O Field app

The WAGO I/O Field app is an app for maintenance, diagnostics, operation and monitor-
ing of installed WAGO I/O System Field modules and IO-Link devices.
This app allows you to display product information, read and write process data and ad-
just settings and parameters for both fieldbus modules and IO-Link devices. The commu-
nication this requires takes place through the Bluetooth
once a Data Matrix code has been scanned to select the product.
Users and the associated access rights can be set up and managed. Outputs can be
forced and inputs set in order to support commissioning of systems. The current mea-
sured values of a port can be displayed (temperature, voltage, current and states) and
configured (including operating mode and filters). Products can be reset to the factory
settings and firmware restarted.
Short Overview
• Scanning a data matrix code of a module for product selection
30 Product manual | Version: 2.0.0
16DO FLD EI DC 24V 2.0A
Tab Description
(All) Port information and set-
tings for ports X01, X02, ...
Information Display current measured
values for port (tempera-
ture, voltage, current and
state on pins 1, 2 and 4)
Status Display status information
for the entire port
Configuration Make port settings (such
as operating mode or
product check for valida-
tion and backup)
Process Data Display the process data
(input/output)
(All) Product Settings
Device Configuration Configure parameters for
IP connection
Maintenance Information Save maintenance infor-
mation
Firmware Upgrade Update firmware
Factory Reset Reset the product to fac-
tory settings
®
Bluetooth Access via Bluetooth
- Forcing for digital inputs
and outputs
- Set up and manage users
- Log users on and off
765-1503/100-000
Section
8 Configure Ports
[} 63]
8 Configuring IP Param-
eters [} 64]
8 Storing Maintenance
Information [} 65]
8 Updating Firmware
[} 103]
8 Resetsetting the Mod-
ule to the Factory Set-
tings [} 68]
®
8 Configure Bluetooth
[} 69]
8 Forcing Digital Inputs
and Outputs [} 74]
8 Logging Users on and
off and Managing Them
[} 71]
®
interface of the mobile device