Clear The Intrusion-Pswd Condition; Invmacadr; Ioscfgcopy; Isis-Adj-Fail - Cisco ONS 15310-CL Troubleshooting Manual

1.7.119 INVMACADR

Clear the INTRUSION-PSWD Condition

In node view, click the Provisioning > Security tabs.
Step 1
Click Clear Security Intrusion Alarm.
Step 2
If the condition does not clear, log into the Technical Support Website at
Step 3
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).
1.7.119 INVMACADR
The Equipment Failure Invalid MAC Address alarm occurs when the ONS 15310-CL or
ONS 15310-MA MAC address is invalid. The MAC Address is permanently assigned to the chassis when
it is manufactured. Do not attempt to troubleshoot an INVMACADR alarm. Log into the Technical
Support Website at http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800
553-2447).

1.7.120 IOSCFGCOPY

The IOS Configuration Copy in Progress condition occurs on ML-100T-8 Ethernet cards when a
Cisco IOS startup configuration file is being uploaded or downloaded to or from an ML-100T-8 Ethernet
card. (This condition is very similar to the
ML-100T-8 Ethernet cards rather than to the controller card.)
The condition clears after the copy operation is complete. (If it does not complete correctly, the
"NO-CONFIG" condition on page 1-112
IOSCFGCOPY is an informational condition.
Note
For more information about the Ethernet cards, refer to the Cisco ONS 15310-CL and
Note
Cisco ONS 15310-MA Ethernet Card Software Feature and Configuration Guide.

1.7.121 ISIS-ADJ-FAIL

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
1-80
Default Severity: Major (MJ), Service-Affecting (SA)
SONET Logical Object: BPLANE
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: EQPT
Default Severity: Minor (MN), Non-Service-Affecting (NSA)
SONET Logical Object: OCN
"SFTWDOWN" condition on page 1-128
could be raised.)
Chapter 1 Alarm Troubleshooting
but it applies to
78-17235-01