1.7.85 FE-LOF
1.7.85 FE-LOF
The Far End LOF condition occurs when a far-end node reports the
C-bit line type mode.
Clear the FE-LOF Condition
Step 1
To troubleshoot an FE condition, determine which node and port link directly to the card reporting the
FE condition.
Log into the node that links directly to the port reporting the FE condition.
Step 2
Complete the
Step 3
Step 4
If the condition does not clear, log into the Technical Support Website at
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).
1.7.86 FE-LOS
The Far End LOS condition occurs in C-bit line type mode when a far-end node reports the
alarm on page
Clear the FE-LOS Condition
To troubleshoot the FE condition, determine which node and port link directly to the card or port
Step 1
reporting the FE condition.
Log into the node that links directly to the port reporting the FE condition.
Step 2
Complete the
Step 3
If the condition does not clear, log into the Technical Support Website at
Step 4
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).
1.7.87 FE-MANWKSWBK-SPAN
The FE-MANWKSWBK-SPAN condition is not used in the ONS 15310 platforms in this release. It is
reserved for development.
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
1-64
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: DS3
"Clear the LOF (DS1) Alarm" procedure on page
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: DS3
1-96.
"Clear the LOS (DS1) Alarm" procedure on page
Chapter 1
Alarm Troubleshooting
"LOF (DS3)" alarm on page 1-88
1-87. It also applies to FE-LOF.
"LOS (DS3)"
1-95.
in
78-17235-01