Cisco ONS 15310-CL Troubleshooting Manual page 307

Chapter 1 Error Messages
Table 1-1 Error Messages (continued)
Error Warning
ID Error Warning Message
EID-3402 Unable to complete the switch request.
The {0} card is either not present or is not responding. Try
again after ensuring that the {0} card is present and is not
resetting.
EID-3403 Admin state transition has not been attempted on the monitored
port.
EID-3404 The far end IP address could not be set on the {0} termination.
The IP address cannot be:
loopback (127.0.0.0/8)
class D (224.0.0.0/4)
class E (240.0.0.0/4)
broadcast (255.255.255.255/32)
internal {1}
EID-4000 The {0} ring name cannot be changed now. A {0} switch is
active.
EID-4001 The {0} ring ID cannot be changed now. A {0} switch is active. You cannot change the ring ID because a
WID-4002 CAUTION: Reverting to an earlier software release may result
in TRAFFIC LOSS and loss of connectivity to the node. It may
require onsite provisioning to recover.
If the node was running {0} before, reverting will restore the
{0} provisioning, losing any later provisioning. If the node was
running some other version, reverting will LOSE ALL
PROVISIONING.
{1}
{2}
EID-4003 The IOS console is disabled for the card in slot {0}.
EID-4004 Error cancelling software upgrade.
EID-4005 {0} encountered while performing DB backup.
EID-4006 The file {0} does not exist or cannot be read.
EID-4007 The size of {0} is zero.
WID-4008 A software upgrade is in progress.
{0} can not proceed during a software upgrade.
Please try again after the software upgrade has completed.
EID-4009 {0} encountered while restoring database.
EID-4010 The operation was terminated due to the following error:
{0}
78-17235-01
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
Description
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
You cannot change the ring name because a
switch of the same ring type is active.
switch of the same ring type is active.
Refer to the warning message text.
The card may not be an IOS-based card or it
may be rebooting.
CTC encountered an error while cancelling
the software upgrade.
CTC encountered the specified error during
database backup.
Refer to error message.
The size of the file that is being backed up
or restored is zero.
The specified action cannot be performed
during a software upgrade. You must try
after the upgrade process is completed.
CTC encountered the specified error while
restoring the database.
Refer to the error message text.
1-31