Error Dialog Box - Cisco ONS 15310-CL Troubleshooting Manual

Chapter 1 Error Messages
Table 1-1 Error Messages (continued)
Error Warning
ID Error Warning Message
EID-3144 Max number of static routes exceeded.
EID-3145 RIP Metric is not in the range 1-15.
EID-3146 Invalid RIP Metric
EID-3147 Error creating summary address.
EID-3148 No Layer 2 domain has been provisioned.
EID-3149 Unable to retrieve MAC addresses.
EID-3150 The target file {0} is not a normal file.
EID-3151 The target file {0} is not writeable.
EID-3152 Error creating Protection Group
EID-3153 Cannot delete card, it is in use.
EID-3154 Cannot {0} card, provisioning error.
EID-3155 Error Building Menu
EID-3156 Error on building menu (cards not found for {0} group)
EID-3157 Unable to set selected model: unexpected model class {0}
EID-3158 Unable to switch, a similar or higher priority condition exists
on peer or far-end card.
1
EID-3159 Error applying operation.
EID-3160 {0} error encountered.
EID-3161 Ring Upgrade Error
EID-3162 This protection operation cannot be set because the protection
operation on the other side has been changed but not yet
applied.
EID-3163 Cannot validate data for row {0}
EID-3164 New Node ID ({0}) for Ring ID {1} duplicates ID of node {2} The new specified node ID for the specified
78-17235-01
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
Description
The number of static routes has exceeded its
limit.
The Routing Information Protocol (RIP)
metric should be in the range of 1 to 15.
Refer to the error message text.
There was an error while creating the
summary address.
You must provision any one of the layer 2
domain.
Refer to the error message text.
The specified target file is not a normal file.
The target file is not writeable. Specify
another file.
CTC encountered an error creating
Protection Group.
Refer to the error message text.
CTC cannot perform the task on the card.
CTC encountered an error building the
menu.
CTC encountered an error while building
the menu, as cards could not be found for
the specified group).
CTC encountered an unexpected model
class while trying to complete the task.
Refer to the error message text.
CTC encountered an error while applying
this operation.
CTC encountered the specified error.
An error was encountered while attempting
to upgrade the BLSR. Refer to the details
portion of the error dialog box for more
information.
Refer to the error message text.
CTC cannot validate the data for the
specified row.
ring ID is the same as another node ID.
1-21