Forced-Req-Span; Clear The Forced-Req-Span Condition; Frcdswtoint; Frcdswtopri - Cisco ONS 15310-CL Troubleshooting Manual

Sonet multiservice platforms
Hide thumbs Also See for ONS 15310-CL:
Table of Contents

Advertisement

1.7.91 FORCED-REQ-SPAN

1.7.91 FORCED-REQ-SPAN
The Force Switch Request Span condition applies to optical trunk cards in spans when the Force Span
command is applied to a span to force traffic from working to protect or from protect to working. This
condition appears on the network view Alarms, Conditions, and History tabs. The port where the Force
Span command was applied is marked with an "F" on the network view detailed circuit map.
This condition can also be raised in 1+1 facility protection groups. If traffic is present on a working port
and you use the Force command to prevent it from switching to the protect port (indicated by "FORCED
TO WORKING"), FORCED-REQ-SPAN indicates this force switch. In this case, the force is affecting
not only the facility, but the span.

Clear the FORCED-REQ-SPAN Condition

Step 1
Complete the
page
Step 2
If the condition does not clear, log into the Technical Support Website at
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).

1.7.92 FRCDSWTOINT

The Force Switch to Internal Timing condition occurs when the user issues a Force command to switch
to an internal timing source.
Note
FRCDSWTOINT is an informational condition. It does not require troubleshooting.

1.7.93 FRCDSWTOPRI

The Force Switch to Primary Timing Source condition occurs when the user issues a Force command to
switch to the primary timing source.
FRCDSWTOPRI is an informational condition. It does not require troubleshooting.
Note
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
1-66
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: OCN
"Clear an External Switching Command on a Path Protection Span" procedure on
1-153.
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: NE-SREF
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: EXT-SREF, NE-SREF
Chapter 1
Alarm Troubleshooting
78-17235-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ons 15310-ma

Table of Contents