Frcdswtosec; Frcdswtothird; Frngsync; Clear The Frngsync Condition - Cisco ONS 15310-CL Troubleshooting Manual

Chapter 1 Alarm Troubleshooting

1.7.94 FRCDSWTOSEC

The Force Switch to Second Timing Source condition occurs when the user issues a Force command to
switch to a second timing source.
FRCDSWTOSEC is an informational condition. It does not require troubleshooting.
Note

1.7.95 FRCDSWTOTHIRD

The Force Switch to Third Timing Source condition occurs when the user issues a Force command to
switch to a third timing source.
Note FRCDSWTOTHIRD is an informational condition. It does not require troubleshooting.

1.7.96 FRNGSYNC

The Free Running Synchronization Mode condition occurs when the reporting ONS 15310-CL or
ONS 15310-MA is in free-run synchronization mode. External timing sources have been disabled and
the node is using its internal clock, or the node has lost its designated BITS timing source. After the
24-hour holdover period expires, timing slips could begin to occur on a node relying on an internal clock.
If the ONS 15310-CL or ONS 15310-MA is configured to operate from its internal clock, disregard the
Note
FRNGSYNC condition.

Clear the FRNGSYNC Condition

If the ONS 15310-CL or ONS 15310-MA is configured to operate from an external timing source, verify
Step 1
that the BITS timing source is valid. Refer to the "Timing" chapter in the Cisco ONS 15310-CL and
Cisco ONS 1310-MA Reference Manual for more information about it.
If the BITS source is valid, clear alarms related to the failures of the primary and secondary reference
Step 2
sources, such as the
If the condition does not clear, log into the Technical Support Website at
Step 3
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).
78-17235-01
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: EXT-SREF, NE-SREF
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: EXT-SREF, NE-SREF
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: NE-SREF
"SYNCPRI" alarm on page 1-136 and the
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
1.7.94 FRCDSWTOSEC
"SYNCSEC" alarm on page 1-137.
1-67