Table of Contents
Advertisement
Figure 53. Lifting the Locking Handle on the SBxPWRSYS1-80 DC Power
6. Carefully align the power supply in the slot and slide it into the slot until
it makes contact with the connector inside the chassis. Refer to
Figure 54.
Figure 54. Inserting the SBxPWRSYS1-80 DC Power Supply
7. Gently press on the faceplate of the power supply to seat the unit on
the connector on the backplane of the chassis, and lower the locking
handle to secure the unit in the chassis. Refer to Figure 55 on page
108.
SBx908 GEN2 Installation Guide for Virtual Chassis Stacking
Supply
107
Advertisement
Table of Contents
