Table of Contents
Advertisement
PWR600 DC
The PWR600 DC module is a DC power supply for the switch. Refer to
Figure 19.
Power Supply
LEDs
The PWR600 DC power supply has the two LEDs on the front panel as
shown in Figure 19. See Table 14 for the descriptions.
Figure 19. PWR600 DC Power Supply
Table 14. LEDs on the PWR600 DC Power Supply
Green LED
Amber LED
Solid green
Off
Blinking
Off
green
Solid green
Blinking amber
x950 Series Installation Guide for Standalone Switches
LEDs
Description
The power supply is operating
normally.
The power supply is in the standby
mode.
The power supply is experiencing a
warning condition, but is still
operating. Possible causes are listed
here:
- The power supply is overheating.
- The speed of its fan is too low.
- Its output current is too high.
- The input voltage from the DC
power source is too low.
41
Advertisement
Table of Contents
