Planning the Stack
Here are factors to consider when planning a stack:
How many SBx908 GEN2 Chassis will be in the stack? The
maximum is four chassis.
Which line cards will have the trunk ports?
How many trunk links will there be between switches? The
maximum number varies by Ethernet line card. Refer to Table 15
on page 57.
Which ports on the line cards will be the trunk links? Refer to
"Stack Trunk" on page 52.
Do all the switches have the same version of the AlliedWare Plus
management software, preferably v5.4.8-0.2 or later? Instructions
in Chapter 6, "Configuring Switches for Stacking" on page 149
explain how to verify this information.
Have you selected ID numbers, in the range of 1 to 4, for the
switches? Refer to "Switch ID Numbers" on page 69.
SBx908 GEN2 Installation Guide for Virtual Chassis Stacking
71