Table 18: Example Of A Completed Stacking Worksheet - Allied Telesis SwitchBlade x908 GEN2 Installation Manual

Chapter 2: Virtual Chassis Stacking
Switch
Master Bldg 2
rm 104
Member Bldg 3
rm 215
Member Bldg 4
rm 106
Member
74
Table 17. Stacking Worksheet Columns (Continued)
Column
Trunk: Slots, Line
Cards, and Ports
Table 18 is an example of a completed worksheet for the stack of three
switches in Figure 18 on page 56.
Table 18. Example of a Completed Stacking Worksheet
Location ID
1
2
3
4
Description
This column is for the ports of the trunk. If you
have not yet chosen them, you should do so
before beginning the configuration procedures.
Allied Telesis recommends using the same ports
as trunk ports on all the switches of the stack.
Although this is not mandatory, it can make
managing and troubleshooting the stack easier.
Refer to "Stack Trunk" on page 52.
Firmware
Priority Version
Number
1 5.4.9-2
2 5.4.9-2
3 5.4.9-2
4
Trunk:
Slots, Line Cards, and
Ports
slot 5 XEM2-4QS
ports 1, 5
slot 6 XEM2-4QS
ports 1, 5
slot 5 XEM2-4QS
ports 1, 5
slot 6 XEM2-4QS
ports 1, 5
slot 5 XEM2-4QS
ports 1, 5
slot 6 XEM2-4QS
ports 1, 5