Figure 44: Removing The Grounding Lug From The Chassis; Figure 45: Attaching The Grounding Wire To The Grounding Lug - Allied Telesis SwitchBlade x908 GEN2 Installation Manual

Figure 44. Removing the Grounding Lug from the Chassis
3. Insert one end of the grounding wire into the grounding lug, as shown
in Figure 45, and use a crimping tool to secure the wire to the
grounding lug.
Figure 45. Attaching the Grounding Wire to the Grounding Lug
4. Install the grounding lug on the rear panel of the chassis. Refer to
Figure 46 on page 100.
SBx908 GEN2 Installation Guide for Virtual Chassis Stacking
99