Chapter 4: Installing The Chassis - Allied Telesis SwitchBlade x908 GEN2 Installation Manual

Chapter 4
Installing the Chassis
The procedures in this chapter explain how to install the chassis in a
standard 19-inch equipment rack. The procedures are listed here:
 "Tools and Material" on page 92

"Adjusting the Equipment Rack Brackets" on page 93
 "Installing the Chassis in an Equipment Rack" on page 97

"Installing the Chassis Grounding Wire" on page 98
 "Installing SBxPWRSYS2 AC Power Supplies" on page 101

"Installing SBxPWRSYS1-80 DC Power Supplies" on page 105
 "Installing Ethernet Line Cards" on page 109

"Installing Blank Line Card Slot Covers" on page 113
 "Installing the Blank Power Supply Slot Cover" on page 115

"Installing the Power Cord Retaining Clips" on page 117
 "Verifying the Installation" on page 118
91