Setting Preferences; Fahrenheit/Celsius; Language; Inactive Backlight Settings - Honeywell Home T10 Pro RedLINK Manual

1
3
Notifications
Set the Date
and Time
Fig. 47.
When there is an active alert or notification, you must
select the notification banner and acknowledge the
message before you are allowed to access the menu icon.
IAQ REMINDERS
You can set up IAQ reminders in the thermostat to remind
users when filters, pads, bulbs, etc. need cleaning or
replacement. The available reminders vary based on the
ISU settings. For example, if the thermostat is configured
to control a flow through humidifier, it will have the
humidifier pad reminder but not the humidifier tank
reminder:
• Air Filter 1
• Air Filter 2
• Electronic Air Cleaner Pre-Filter
• Electronic Air Cleaner Post-Filter
• Humidifier Tank/Water Filter
• Humidifier Pad
• Dehumidifier Filter
• Ventilator Core
• Ventilator Filter
• UV Bulb 1
• UV Bulb 2
Reminders that are displayed under preferences will
change based on the IAQ equipment installed. Reminders
for equipment that is already set up can be set using the
steps below. Reminders for IAQ equipment that is not yet
set up must be turned on from the installer setup.
NOTE: Air Filter, Humidifier Pad, Dehumidifier Filter, and
Ventilator Filter are displayed under Preferences
even if they have not been set up. Humidifier Pad
is not displayed if a steam humidifier has been
installed.
2
Notifications
Set the Date
and Time
MCR37803
33
T10 PRO SMART THERMOSTAT WITH REDLINK
To access or adjust the reminder settings
• Select the menu icon.
• Scroll down and select "preferences".
• Select the reminder you want to set from the list (shown
above).
• Press ^ or v to set the timer length. Ranges, increments,
and units will change based on the reminder.
• Press Done to save the reminder.
• Press Reset Timer when you have completed the
recommended maintenance or you can extend the
timer setting to turn off the alert and remind you later
to do the recommended maintenance.
• Repeat these steps for all reminders you want to set
NOTE: When set for run time days, the thermostat tracks
the amount of time the fan has run and compares
that time against the number of run time days
selected. Fan run time is counted when there is a
call for forced air heating, cooling, or fan.

Setting Preferences

Preference menu options let you select how the
thermostat displays information or responds to certain
situations.
To access the Preferences menu:
— Touch menu
— Scroll down and select "preferences".
— Select an option and follow prompts:
• Display
— Temperature units (Fahrenheit or Celsius)
— Language (English French or Spanish)
— Inactive backlight setting (0% to 100%)
— Inactive Sleep backlight setting (0% to 100% and
inactive sleep time settings. Note: these can be set
different than the schedule sleep times)
— Indoor display offsets (temperature and humidity)
— Clean screen (allows you 30 seconds to clean dis-
play without accidentally adjusting a setting)

• Date and Time

— Set date
— Set time
— Set to 12 or 24 hour clock
— Set for daylight savings time
• Reminders (these vary based on ISU settings)
— Air Filter 1
— Air Filter 2
— Electronic Air Cleaner Pre-Filter
— Electronic Air Cleaner Post-Filter
— Humidifier Tank/Water Filter
— Humidifier Pad
— Dehumidifier Filter
— Ventilator Core
— Ventilator Filter
— UV Bulb 1
— UV Bulb 2
• Adaptive recovery
— On or Off
Touch Done to save your settings.
33-00462—01