Preset Energy-Saving Schedules; Setting The Fan; Selecting System Mode - Honeywell Home FocusPRO Wi-Fi Series User Manual

Setting the time and day
1 Press Set Clock/Day/Schedule, then press s or t to set clock.
2 Press Set Day, then press s or t to select the day of week.
3 Press Done to save.
Note: If the Set Clock/Day/Schedule option is not displayed, press Done.
Note: If the display flashes Set Clock, the thermostat will follow your settings for the
Monday "Wake" time period until you reset the time and day.

Setting the fan

Press Fan to select On or Auto (toggle to re-select).
Auto : Fan runs only when the heating or cooling system is on. Auto is the most
commonly used setting.
On: Fan is always on.
Note: Options may vary depending on your heating/cooling equipment.

Selecting system mode

Press System to select:
Heat: Controls only the heating system.
Cool: Controls only the cooling system.
Off: Heating/cooling systems are off.
Auto: Selects heating or cooling depending on the indoor temperature.
Em Heat (heat pumps with aux. heat): Controls auxiliary/emergency heat.
Compressor is off.

Preset energy-saving schedules

This thermostat is pre-set with energy-saving program settings for four time periods. Using the
default settings can reduce your heating/cooling expenses if used as directed. Savings may vary
depending on geographic region and usage.
Default Heat Settings
WAKE
6:00 am
LEAVE
8:00 am
RETURN
6:00 pm
SLEEP
10:00 pm
Default Cool Settings
°
°
°
°
°
°
°
°
M37733A
7
M38875
M38876
Note: Depending on how
your thermostat was installed,
you may not see all system
settings.
HOLD
M38873
HOLD
M38874