Table of Contents
Advertisement
TB7100A1000 MULTIPRO™ MULTISPEED AND MULTIPURPOSE THERMOSTAT
System Settings
Heat: Thermostat controls the heating system.
Off: Both heating and cooling systems are off. Fan is
turned off.
Cool: Thermostat controls the cooling system.
Auto: Thermostat automatically changes between
heat and cool operation, depending on indoor
temperature.
Fan Settings
Auto: Fan runs only when heating/cooling system is
on.
On: Fan runs continuously.
Table 5 shows default program settings. See Owner's
Guide for complete instructions to change the
program.
Table 5. Energy saving default schedule.
Schedule
Period
Time
Occ1
8:00am
Unocc1
10:00pm
Occ2
1:00pm
Unocc2
12:00pm
(Noon)
62-0273—07
Setpoints
Heat
Cool
Setting
70°F
75°F
On
(21°C)
(25.5°C)
55°F
85°F
Auto
(10°C)
(24°C)
70°F
75°F
On
(21°C)
(25.5°C)
55°F
85°F
Auto
(10°C)
(24°C)
Minimum-Off Timer
(Compressor Protection)
The thermostat has an adjustable Minimum-Off Timer
that can be set from zero to five minutes (Factory
Setting—five minutes). The Minimum-Off Timer can
be bypassed through the Installer System Test or it
can be bypassed permanently by setting the
Minimum-Off Timer to 0 minutes in the Installer
Setup. The Minimum-Off Timer is activated after the
compressor turns off:
— If the thermostat is system powered (common wire),
the Minimum-Off Timer is also activated upon
initial startup and after power interruptions.
— If there is a call for cooling or heating during the
Minimum-Off Time, the thermostat displays "Wait."
— When the Minimum Off Timer expires, "Cool On" or
"Heat On" (heat pumps only)" appears solidly in the
display and the compressor and fan turn on.
Indoor Temperature Sensor
Fan
Allow indoor temperature sensor to absorb the air for a
minimum of five minutes before taking a reading. See
the Sensor instructions for more information.
14
Advertisement
Table of Contents
