On The Wireless Relay Box; On The Programmable Thermostat - Honeywell Home T3R Wireless Binding Manual

On the Wireless Relay Box

Press the
1
LED should flash ORANGE once.
Press and hold the
2
LED should blink ORANGE continuously.

On the Programmable Thermostat

Hold the Thermostat ~1m away from the
3
Relay Box and press the
together for 3 sec to enter binding menu.
If 14A and 0 is flashing follow steps 4-8
If 14A and 1 is flashing follow steps 9-12
Press the
4
Press the
5
1
will appear on left side. If a
Press the
6
LED on the Relay Box should change to GREEN.
Press the
7
Cycle the temperature all the way up and then all
8
the way down to test that the Relay Box is switching
on and off (this might take a few minutes).
If 14A and 1 is flashing follow these steps
Press the
9
Press the
10
Press the
11
Press the
12
EN
pinhole button for 3 sec. The
button for 3 sec. The
MENU
0
button. should start flashing.
1
button. should start flashing. A small
SAVE
button until
button to return to the Home Screen.
14C:0
button until
0
button. should start flashing.
1
button. should start flashing.
button to SAVE
2
and buttons
0
appears repeat.
is displayed. The
is displayed.
and follow steps 3-8.