Installing Software - Olympus USPM-RU-W Series Operation Manual

7. Installing Software

Immediately after the installation (or re-installation) of the software application, all settings are
set to their respective default values. After you have installed the software application, be sure
to execute wavelength calibration by following the instruction manual of the relevant product that
you are using.
(1) Place the CD-ROM into the CD-ROM drive.
(2) Double-click setup.exe in the CD-ROM to execute it. A warning related to the user
account control may be displayed depending on the settings of the computer used.
Click the Yes button to proceed with the installation.
(3) In the first screen, click the Next button to proceed.
(4) In the following screen, click the Install button to proceed.
(5) In the last screen, click the Finish button to complete the installation.
PV9576-F4E006 28