Olympus USPM-RU-W Series Operation Manual page 8

Do not disassemble or modify the unit!
Disassembly or modifying the unit for a reason other than replacement of
consumables may cause fire, electric shock hazard or injury. If an
abnormality occurs, such as unusual odor or noise, immediately turn off the
power, remove the power plug from the wall outlet, and contact our sales
representatives or our sales department for repair. For your own safety,
never attempt to perform repairs on your own.
Do not cover the vents!
There are vents for heat dissipation on the front and the side of the
photometric head.
Be careful not to cover the vents.
Install the unit at least 10 cm away from a wall!
Since the lamp house gets hot when the lamp is illuminated, place the unit
at a point at least 10 cm away from any walls. Operating the unit near a wall
may cause fire.
Do not touch the lamp house or put anything on it!
Do not touch the top of the lamp house that becomes hot when the lamp is
illuminated. Do not put anything on the lamp house. There is the danger of
burns or fire.
Do not place the plastic cover on the lamp house until it has cooled!
Since the lamp house gets hot when lamp is illuminated, do not place the
plastic cover on it until the lamp house has cooled. Otherwise, there is a risk
of fire.
Do not watch the light of the halogen lamp directly!
U
Do not watch the light of the halogen lamp directly.
U
Eyes might be damaged
PV8344F4E013 6