Olympus USPM-RU-W Series Operation Manual page 85

(reflection/transmission
) [%]
Chroma
Hue [Degree]
Peak [nm]
Valley [nm]
Pallet
PV8959-F4E005
factor standards of the luminous reflection and
transmission factors; click the check box when
enabling the set standard value.
Sets the upper- and lower-limit standards of the
chroma; click the check box when enabling the set
standard value.
Sets the upper- and lower-limit standards of a hue
angle; click the check box when enabling the set
standard value.
Sets the upper- and lower-limit wavelength values of a
maximum value in a reflection factor; click the check
box when enabling the set standard value.
Sets the upper- and lower-limit wavelength values of a
minimum value in a reflection factor; click the check
box when enabling the set standard value.
Displays the input pallet of a reflection factor
standard; the reflection factor standard value can also
be entered using this pallet. Press the upper- or
lower-limit value setting button and click the value to
be set as a standard value in a graph using the
mouse. The clicked point is used as a standard value.
To modify the point, press the upper- or lower-limit
value deletion button. During completion, press the
OK button.
32