Download Print this page

Advertisement

Quick Links

INSTRUCTIONS
STM7-AF
AUTOFOCUS UNIT
This instruction manual is for the Olympus autofocus unit STM7-AF.
To ensure the safety, obtain optimum performance and to familiarize yourself fully with the use
of this attachment, we recommend that you study this manual thoroughly before operating
the unit.
Retain this instruction manual in an easily accessible place near the work desk for future
Optical Microscope Accessory
reference.

Advertisement

loading
Need help?

Need help?

Do you have a question about the STM7-AF and is the answer not in the manual?

Questions and answers

Summary of Contents for Olympus STM7-AF

  • Page 1 STM7-AF AUTOFOCUS UNIT This instruction manual is for the Olympus autofocus unit STM7-AF. To ensure the safety, obtain optimum performance and to familiarize yourself fully with the use of this attachment, we recommend that you study this manual thoroughly before operating the unit.
  • Page 2 In accordance with European Directive on Waste Electrical and Electronic Equipment, this symbol indicates that the product must not be disposed of as unsorted municipal waste, but should be collected separately. Refer to your local Olympus distributor in EU for return and/or collection systems available in your country. For Korea only A급...
  • Page 3 CONTENTS Introduction ...............................1 Safety precautions ..........................1 1 SPECIFICATIONS ..........................
  • Page 5: Safety Precautions

    This AF unit is the autofocus unit to be mounted to the measuring microscope STM7. Contents of instruction manuals This instruction manual is for the autofocus unit STM7-AF only. In addition to this manual, refer to the instruction manuals for the microscope and the modules to be used together.
  • Page 6 CAUTION - Electric safety - Do not use the device in close proximity to the sources of strong electromagnetic radiation. Proper operation may be interfered. The electromagnetic environment should be evaluated prior to operation of the device. Be sure to turn OFF the power of the device before connecting /disconnecting cables and units. This device is designed for use in Class A industrial environment for IEC61326-1 International Standard concerning EMC.
  • Page 7 Laser safety label related to the laser beam are attached to the unit. Always pay attentions to the label. Warning label position When caution labels are dirty or peeled off, contact Olympus for replacement or inquiries. CAUTION - Autofocus unit -...
  • Page 8: Handling Precautions

    (1) Near an inlet or exhaust outlet of air conditioning equipment, etc. (2) In a place subjected to large vibrations or change in temperature. (3) Near equipment producing abnormal noise (including non-Olympus equipment) (4) In a place subjected to direct sunlight.
  • Page 9: Specifications

    With 100X objective Correction range: ±0.3 mm Reproducibility: 1 μm (2 σ) The above figures are values measured using specimens provided by Olympus. Note that the detection range is different from the trackable level differences in Track mode. Applicable observation methods...
  • Page 10 MEMO...
  • Page 12 Manufactured by Shinjuku Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0914, Japan Distributed by 48 Woerd Avenue Waltham, MA 02453, U.S.A. 8F Olympus Tower, 446 Bongeunsa-ro, Gangnam-gu, Seoul, 06153 Korea AX8436 03...