Olympus USPM-RU-W Series Operation Manual page 63

Executing measurement
Arrange the sample to be measured to enter the measurement state. Press the MEASURE
button to execute measurement for acquiring the spectral light intensity of the sample.
Confirming the spectral measured values (reflection and transmission factors)
Confirm the spectral measured values on each window. Each data and wavelength piece of
information can be acquired by performing an operation on the operation panel.
In [Data] and [Value], you can confirm
the currently selected data number and
its detail information. To change the
data number and wavelength to be
displayed, press the "<" and ">"
buttons.
Saving spectral measured value data
Select [SaveAs.. datafile] from the file menu. A save dialog box appears, thus assign a name
to the data and save it. You can change the saving format by changing the extension in the
"Save" dialog box. For details of the saveing format, see the [5.1 [File] menu].
PV8959-F4E005
The graph of the spectral
measured values is displayed
on the GRAPH window. The
range of a vertical axis can be
changed on the GRAPH
setting window.
10
A chromaticity diagram and its related
numeric value are displayed on the
DIAGRAM window. The type of the
chromaticity diagram can be changed on the
GRAPH setting window.
The numeric values of the spectral
measured values are displayed on
the TEXT window. The display
interval can be changed on the
GRAPH setting window.
In [Status], the [OVER] field
displayed in red indicates that the
spectral light intensity was saturated.
In this case, the spectral measured
values cannot be obtained
accurately. Adjust the sampling time
again