Olympus USPM-RU-W Series Operation Manual page 84

6.2.2. [Standard] setting
Menu
Reflection factor
standard
Average
(reflection/transmission
) [%]
Luminous
PV8959-F4E005
Reflection factor standard
Sets the upper- and lower-limit
reflection(/transmission) factor standards of a
reflection factor to each wavelength; click the check
box when enabling the set standard value. Enter the
wavelength in [Wavelength], a lower-limit reflection
factor value in [Lower], and an upper-limit reflection
factor value in [Upper]. Upper- and lower-limit
reflection factor values can be set to a maximum of 20
wavelengths. Values of more than 0 must be entered
to [Lower] and [Upper]. Therefore, when you want to
set only [Lower], for example, only [Lower] is enabled
if you enter [0] in the corresponding [Upper]. This item
can also be set in the pallet described later.
Sets the upper- and lower-limit reflection/transmission
factor standards of the average reflection and
transmission factors; click the check box when
enabling the set standard value.
Sets the upper- and lower-limit reflection/transmission
31
Description