Attaching The Objective; Attaching The Revolving Nosepiece; Attaching The Mix Slider / Dic Slider For Reflected Light Observation; Attaching The Observation Tube - Olympus MX63 Instructions Manual

3

Attaching the objective

For attaching procedures, see "Removing and attaching the objective"
(P.66).
4

Attaching the revolving nosepiece

For attaching procedures, see "Attaching the revolving nosepiece" (P.67).
Attaching the MIX slider / DIC slider for
5
reflected light observation
For attaching procedures, see "Inserting the MIX slider for reflected light
observation" (P.58) or "Setting the DIC slider" (P.52).
6

Attaching the observation tube

Loosen the tube clamping screw a sufficiently using the Allen
1
screwdriver.
2
Fit the circular dovetail at the bottom of the observation tube into the
tube mount on the top surface of the arm.
Tighten the tube clamping screw a to secure the observation tube.
3
a
7

Attaching the eyepiece

For attaching procedures, see "6-1 Removing and attaching the
eyepiece" on page 63.
MX63/MX63L
91 91