Table of Contents
Advertisement
c
b
d
9
Attaching the breath shield MX-BSH-ESD-2
After the revolving nosepiece attached, attach the breath
NOTE
a
shield.
Attach the breath shield mounting fixture a on the breath shield b
1
temporarily using the provided screws (shorter ones) with the Allen
screwdriver. (2 positions)
If they are attached completely, the breath shield cannot
NOTE
be attached to the microscope frame.
Align the breath shield clamping screw holes c with the mount
2
holes d of the mounting fixture and secure using the provided
screws (longer ones)
3
Tighten the screws completely that were secured temporarily.
Do not tighten the screws excessively to prevent the
NOTE
breath shield from cracking.
MX63/MX63L
95
95
Advertisement
Table of Contents
