a
1
b
58
58
Inserting the MIX slider for reflected light
1
observation
1
Loosen the mounting knob a at the rear right of the revolving
nosepiece and pull out the dummy slider b .
2
Insert the MIX slider for reflected light observation (U-MIXR) c to the
2
c
slider insertion slot of the revolving nosepiece so that the connector
comes to the right side, and push it in the second level (position where
the clicking sound is heard).
d
You can check the state whether the MIX slider for reflected light
observation is engaged in or removed from the light path by the
POSITION indicator d of the hand switch (BX3M-HS).
3
Tighten the mounting knob a to secure the slider.
Turning ON the illumination of the MIX slider
2
for reflected light observation
1
If you press the ON/OFF button a of the hand switch (BX3M-HS) to set
it to ON, the illumination of the MIX slider for reflected light observation
(U-MIXR) turns ON.
a
b
c
MIX slider for reflected light
observation position
First level (pulled out)
Second level (pressed in)
Indicator ( b , c )
State
ON
Turns ON.
OFF
Turns OFF.
Light path
OUT
IN
Function
The illumination turns ON.
The illumination turns OFF.