Using The Eye Shades; Adjusting The Tilt - Olympus MX63 Instructions Manual

Semiconductor/fpd/industrial inspection microscopes
Table of Contents

Advertisement

1
The picture shows the hand position when
adjusting the tilt of MX-SWETTR
observation tubes.)
3
When wearing eyeglasses
When not wearing eyeglasses
4
This function is available when U-TBI-3, U-TTR-2, MX-SWETTR or
U-SWETTR-5 is combined.
You can adjust the eyepieces to an easy-to-see height and angle so that
you can observe with a comfortable posture.
1
Hand position
(right and left)
NOTE
.
(Same for other

Using the eye shades

Use the eye shades in the folded-down position.
Raising the folded-down eyeshades in the arrow direction prevents
the unnecessary light from entering between eyepieces and eyes.

Adjusting the tilt

Observation tube
U-TBI-3
U-TTR-2
MX-SWETTR
U-SWETTR-5
Hold the binocular section and move it vertically to set to the desired
position.
· Be careful, if you apply the excessive force to the binocular
section from the upper or lower limit stop position, the
system may be damaged.
· When storing the microscope, keep the eyepieces raised
up in order to prevent the eyepieces from falling.
· The intermediate attachment is not available with U-TBI-3.
· If you observe scratches or dirt on the mirror surface in the
darkfield observation with U-TBI-3, ghosts may appear in
some cases.
MX63/MX63L
Adjustable angle
5° to 35°
5° to 35°
0° to 42°
0° to 35°
37
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx63l

Table of Contents