Attaching The Eyepieces (Standard 10X Eyepieces Or Whsz15X-H); Attaching The Objective Cxpl20X Or Cxpl100Xo - Olympus CX33 Instructions Manual

3

Attaching the eyepieces (Standard 10X eyepieces or WHSZ15X-H)

a
4

Attaching the objective CXPL20X or CXPL100XO

1
Insert WHC15X-H into the eyepiece sleeves and tighten the clamping
screws a using the flathead screwdriver.
1
Screw in the objective to the mount hole of the revolving nosepiece
completely by rotating it in the arrow direction paying attention not
to drop it.
Removing the objective
1
If the objective is screwed in too firmly, use the slip prevention rubber
sheet, etc. to rotate the objective in the direction opposite to the
attaching direction (arrow direction).
When attaching the objective CXPL20X, remove the 40X objective
TIP
first, and then attach objectives in the order of 4X, 10X, 20X and
40X.
CX33
29