0
10
20
30
40
c
36
36
1
b
a
50
60
70
80
90 100
When the eyepiece is equipped with the eyepiece micrometer
1
While looking through the eyepiece equipped with the eyepiece
micrometer, rotate the diopter adjustment ring b to adjust so that
the scales or lines of the eyepiece micrometer in the field of view are
clearly visible. When you rotate the diopter adjustment ring b , keep
pressing the lower part a of the eyepiece.
2
Place the sample.
3
Engage the 10X objective in the light path. While looking through the
eyepiece equipped with the eyepiece micrometer, rotate the coarse/
fine focusing knobs to bring the sample into focus.
4
While looking through the eyepiece which is not equipped with the
eyepiece micrometer, rotate the diopter adjustment ring b to bring
the sample into focus.
When the observation tube is equipped with
the interpupillary distance adjustment ring c
Perform the same operation as described above.
Be sure to use the interpupillary distance adjustment ring c of the
observation tube instead of the diopter adjustment ring b of the
eyepiece described above.