a
b
1
64
64
3
Attaching the eyepiece
1
Insert the eyepiece a into the eyepiece sleeve b until it touches
the end.
NOTE
c
d
· As the binocular tube does not have a positioning groove,
it cannot be used with an eyepiece equipped with a
positioning pin.
· When using the eyepiece equipped with the micrometer,
insert the eyepiece into the right eyepiece sleeve. In this
case, attach the eyepiece so that the eyepiece positioning
pin c enters the groove d below the eyepiece sleeve.
· The
super
widefield
positioning pin. Attach it by inserting the positioning pin to
the positioning groove of the eyepiece sleeve.
eyepiece
(SWH10X-H)
has
a