Xerox WorkCentre 5022 Service Manual page 518

Chain-Link NVM Name
680-410 IPS_CL_BALANCE_DEF_K_MEDIUM_ DEN-
SITY
680-411 IPS_CL_BALANCE_DEF_K_HIGH_ DENSITY
680-412 IPS_PLT_JOB_RAE_SS_NOT_DETECT_
AREA
680-413 IPS_ADF_JOB_RAE_SS_NOT_DETECT_
AREA
680-414 IPS_DENSITY_ADJUSTMENT_FLAG_FOR_O
RIGINAL_TYPE_OF_COPY
680-415 IPS_DENSITY_ADJUSTMENT_FLAG_FOR_D
ENSITY_LEVEL_OF_COPY
680-416 IPS_DENSITY_ADJUSTMENT_FLAG_FOR_O
RIGINAL_TYPE_OF_BW_SCAN_AND_FAX
680-417 IPS_DENSITY_ADJUSTMENT_FLAG_FOR_D
ENSITY_LEVEL_OF_BW_SCAN_AND_FAX
680-418 IPS_DENSITY_ADJUSTMENT_
PARAMETER_A_FOR_COPY
680-419 IPS_DENSITY_ADJUSTMENT_
PARAMETER_B_FOR_COPY
680-420 IPS_DENSITY_ADJUSTMENT_
PARAMETER_A_FOR_BW_SCAN_AND_FAX
680-421 IPS_DENSITY_ADJUSTMENT_
PARAMETER_B_FOR_BW_SCAN_AND_FAX
680-422 IPS_FULL_COLOR_SCAN_SATURATION_ADJ
USTMENT
General
6.3.17 NVM IPS
Table 1 NVM IPS
Setting Setting
Range Range
(Minimum (Maximum Default
Value) Value) Value
0 8 4
0 8 4
0 65535 0
0 65535 0
0 7 0
0 63 0
0 7 0
0 63 0
0 255 64
0 255 0
0 255 64
0 255 0
0 4 2
06/2014
6-90
Write Default
Allowed/ Value
Protected Yes/No Description
O O Default Color Balance Adjustment Level K Color Medium
Density
O O Default Color Balance Adjustment Level K Color High Density
O O For Speed Priority Background Suppression/Slow Scan Non-
detection Area Platen Jobs
Slow Scan Non-detection Area Setup Value BASE at Real
Time AE for Platen Jobs.
O O For Speed Priority Background Suppression/Slow Scan Non-
detection Area ADF/DADF Jobs.
Slow Scan Non-detection Area Setup Value BASE at Real
Time AE for ADF/DADF Jobs.
O O Density Fine Adjustment Flag - Copy Document Type
bit [0]: Text, bit [1]: Photo & Text, bit [2]: Photo
1: Enabled, 0: Disabled
O O Density Fine Adjustment Flag - Copy Density Level
bit [0]: Lighten +2 to bit [4]: Darken +2
1: Enabled, 0: Disabled
O O Density Fine Adjustment Flag - BW Scan/Fax Document Type
bit [0]: Text, bit [1]: Photo & Text, bit [2]: Photo
1: Enabled, 0: Disabled
O O Density Fine Adjustment Flag - BW Scan/Fax Density Level
bit [0]: Lighten +2 to bit [4]: Darken +2
1: Enabled, 0: Disabled
O O Density Fine Adjustment Slant A for Copy.
Slant A fixed decimal format. bit [6] corresponds to coefficient
1.
O O Density Fine Adjustment Section B for Copy.
The section B negative is specified with 2 complements.
O O Density Fine Adjustment Slant A for BW Scan/Fax.
Slant A fixed decimal format. bit [6] corresponds to coefficient
1.
O O Density Fine Adjustment Section B for BW Scan/Fax.
The section B negative is specified with 2 complements.
O O Saturation Adjustment for Full Color Scan.
0: Pastel +2
1: Pastel +1
2: Normal
3: Vivid +1
4: Vivid +2
Version 1.0
WC 5022/5024