Xerox WorkCentre 5022 Service Manual page 143

075-135 Regi Sensor On Jam (MSI)
BSD-ON: CH8.4, CH4.1, CH8.1
During paper feed from the MSI, the Regi Sensor did not turn ON within the specified time after
the MSI Feed Clutch On.
Cause/Action
Check the following:
• The Regi Sensor (Input Check [071-105]) for operation failure. (PL 15.1)
• The Main Drive Motor (Output Check [042-001]) for operation failure. (PL 3.1)
• The MSI Feed Clutch (Output Check [072-014] for operation failure. (PL 13.3)
• The MSI Feed Roll and the MSI Nudger Roll for contamination, wear, and transportation
failure due to deterioration.
• The Drive Gear for wear and damage.
• A paper transportation failure due to foreign substances on the paper path.
• Usage of out of spec paper.
If no problems are found, replace the ESS/MCU PWB (PL 18.3).
Version 1.0
WC 5022/5024
06/2014
2-121
Status Indicator RAPs
075-135 Regi Sensor On Jam (MSI)