Table of Contents
Advertisement
124-311 Serial Number Fail
BSD-ON: CH3.4
The device was turned ON after it was installed with a new ESS/MCU PWB.
Cause/Action
1.
Remove the EEP ROM from the old ESS/MCU PWB, install the removed EEPROM to the
new ESS/MCU PWB, and then turn ON the power.
2.
Enter the Diag, input [621-400] in the Chain-Link, and set the value to '1'.
3.
Press <Start>.
Version 1.0
WC 5022/5024
06/2014
2-149
Status Indicator RAPs
124-311 Serial Number Fail
- Quick Links:
- Rep 8.1.1 Drum Cartridge
Hide quick links:
Advertisement
Chapters
Table of Contents
