3.3.1 IOT Image Defect Sample
This section describes some Defect Samples and the actions to be taken in case of the follow-
ing IOT problems:
•
IDS1 Auger Mark
•
IDS2 Strobing (27 mm or 13.5 mm Pitch Density)
•
IDS3 White Streaks (Process Direction)
•
IDS4 Black Bands
•
IDS5 Toner Contamination
•
IDS6 Toner Splattering
•
IDS7 White Spots (Irregular)
•
IDS8 Regular Blank Areas in Process Direction (Spots, Streaks, Bands etc.)
•
IDS9 Regular Toner Contamination in Process Direction (Spots, Streaks, Bands etc.)
•
IDS10 Regular Toner Contamination in Process Direction (Side 2)
Version 1.0
WC 5022/5024
3.3.2 IIT Image Defect Sample
This section describes some Defect Samples and the actions to be taken in case of the follow-
ing IIT problems:
•
IDS11 Moire Due to Interference With Copy Documents
•
IDS12 Light Background Due to Background Suppression in Copies of Documents With
Frames
•
IDS13 Background Smear When Using Platen Copy With Non-Standard Documents
•
IDS14 Fluctuation In Background Suppression Values for Copies of Documents With
Medium Density
•
IDS15 Defects Related To Scan Print
•
IDS16 Cold Start Dew
•
IDS17 Static Electricity Offset [occurs after approx. 80 mm (the Heat Roll cycle)]
06/2014
3-13
Image Quality Troubleshooting
3.3.1 IOT Image Defect Sample