Xerox WorkCentre 5022 Service Manual page 689

Figure 13 j0mg91017
19. Insert the tab (x2) of the Fax Box Cover into the tab slot (x2) of the Rear Cover. (Figure
14)
a. Insert the tab (x2) of the Fax Box Cover into the tab slot (x2).
Figure 14 j0mg91018
20. Secure the Fax Box Cover. (Figure 15)
a. Secure the Fax Box Cover by using the screw (x2).
Version 1.0
WC 5022/5024
21. Connect the connector (x2) of the USB Cable and wire harness. (Figure 16)
a. Connect the connector.
b. Connect the connector.
c. Install the cable band.
22. Reinstall the STM Connector Cover. (Figure 17)
a. Pull out the USB Cable and wire harness through the cutout of the STM Connector
Cover.
06/2014
9-21
Figure 15 j0mg91019
Figure 16 j0mg91020
Installation/Removal
9.1.8 Fax Kit