005-125/145 DADF Regi Sensor Off Jam/ DADF Regi
Sensor Off Jam on Inverting
BSD-ON: CH5.5, CH5.4
[DADF Regi Sensor Off Jam]
After the DADF Pre Regi Sensor turned OFF at Scan operation, the DADF Regi Sensor did not
turn OFF within the specified time.
[DADF Regi Sensor Off Jam on Inverting]
After the DADF Pre Regi Sensor turned OFF at Invert operation, the DADF Regi Sensor did
not turn OFF within the specified time.
Cause/Action
Check the following:
•
Transportation failure due to foreign substance on the document path.
•
The surface of the Regi Roll, Out Roll, and Exit Roll for foreign substances.
•
The surface of the Regi Roll, Out Roll, and Exit Roll for wear.
•
The DADF Regi Sensor (Input Check [005-110]) for operation failure. (PL 56.14)
•
The DADF Pre Regi Sensor (Input Check [005-206]) for operation failure. (PL 56.14)
•
The DADF Feed Motor (Output Check [005-008]) for operation failure. (PL 56.6)
•
The Drive Gear for wear and damage.
If no problem is found, replace the DADF PWB. (PL 56.2)
Status Indicator RAPs
005-125/145 DADF Regi Sensor Off Jam/ DADF Regi
005-131/132 DADF Invert Sensor On Jam on Inverting/
DADF Invert Sensor On Jam
BSD-ON: CH5.5, CH5.4
[DADF Invert Sensor On Jam on Inverting]
After the DADF Regi Sensor turned ON at Invert operation, the DADF Invert Sensor did not
turn ON within the specified time.
[DADF Invert Sensor On Jam]
After the DADF Regi Sensor turned ON in the Scan operation, the DADF Invert Sensor did not
turn ON within the specified time.
Cause/Action
Check the following:
•
Transportation failure due to foreign substance on the document path.
•
The surface of the Out Roll for foreign substances.
•
The surface of the Out Roll for wear
•
The DADF Invert Sensor (Input Check [005-211]) for operation failure. (PL 56.10)
•
The DADF Regi Sensor (Input Check [005-110]) for operation failure. (PL 56.14)
•
The DADF Feed Motor (Output Check [005-008]) for operation failure. (PL 56.6)
•
The Drive Gear for wear and damage.
If no problem is found, replace the DADF PWB. (PL 56.2)
06/2014
2-16
Version 1.0
WC 5022/5024